Tag: SR

IN THE WORKS #2

Posted on by steamlococollection in Lord Nelson

LORD NELSON PROGRESS UPDATE 12 DECEMBER 2025

Hello everyone, hope you’re doing well.

I’m delighted to be showing off the first WIP renders of the Lord Nelson add-on. The first item I always model is the frames. Everything is either attached to or rests on the frames, so getting them right is paramount.

In the previous “In The Works”, I mentioned the numerous variations and modifications made to the Lord Nelsons during their working lives. Those modifications extend even to the frames. When ‘Lord Nelson’ was being built in 1926, great care was taken to ensure that the locomotive didn’t exceed the weight limit set by the Civil Engineer. Such was the attention taken that No. E850 actually emerged from Eastleigh Works, weighing 0.75 tons less than the drawing office estimate. Therefore, when the first production batch was being built, certain of those weight-saving measures were deemed unnecessary and the frames of Nos. 851 – 865 were different to Lord Nelson. 850’s frames were later modified, but it still retained a couple of unique elements.

After the frames are complete, work moves onto the front bufferbeam, rear dragbox and the frame stretchers, which help keep the frames nice and square.

Notice the underhung laminated springs and substantial rear dragbox. The hinged cover on the running plate provides access to the expansion and die block, making lubrication a little bit easier. The two valves bracketed onto the rear dragbox are where the water pipes from the tender connect to the locomotive. On top of the valve is the connection to the water feed controls in the cab.

Next time I’ll show the front bogie. If you think the frame variations are bad, wait till you see the bogie variations!

It’s worth mentioning that sometimes I’ll have progress to show, but which I don’t feel justifies a “In The Works” post. Anything that falls into this category will be posted on the SLC Facebook page and a dedicated development page here on the SLC website for the Lord Nelson add-on. This development page will also provide links to all “In The Works” posts about the Nelsons.

Until next time…

IN THE WORKS #1

Posted on by steamlococollection in Lord Nelson

LORD NELSON RESEARCH

Hello everyone, and welcome to the first ‘In The Works’.

Work on the ‘Lord Nelson’ add-on is well underway and I look forward to sharing some renders with you soon. However, long before I sit down to set up the drawings and start the actual modelling, research needs to be completed.

Research can often be overlooked; a bar on a progress chart, a passing comment. But research provides the foundation on which the add-on is built. But how do I go about doing research?

The first step is acquiring research material, this takes the form of books, photographs, drawings and magazines. Of course, obtaining a copy of every photograph and every book to mention a particular class can be a) expensive and b) not every item will contribute significantly to my research so a balanced view is required.

The next step is to start transferring all of that data and observations into a Spec Sheet and a Data Sheet

The Spec Sheet lists all the variations and livery changes I’ve identified across an entire class. The Data Sheet is where I dive down into the details and list all the variations for each individual engine, when they took place and any other observations.

Going through the books I have often reveals small discrepancies with information; dates might be different, engines might have a change listed in one book that isn’t mentioned in another. I have to work out which is the accurate narrative, not an easy task!

This whole process, of course, takes time and concentration. For the ‘Lord Nelson’ add-on, I estimate the process took about 3 months, but that doesn’t mean that I stop looking for further photographs and details, I’m always on the lookout for more information just not with the same intensity!

So how many variations have I identified? Discounting any livery-related changes, I have so far identified over 170 different modifications, some small and some large. This will mean that the ‘Lord Nelson’s will be the most detailed add-on I have produced, and that’s not including trying to create 3 different sound sets, different simulation setups, as well as trying to convey all this information in a easy to read manual!

Still, it’s all part of the fun.😀

In the next ‘In The Works’ I’ll share the first WIP renders of the add-on.

Until next time …

SLC Update 5 August 2025

Posted on by steamlococollection in Announcements, Lord Nelson

Hi everyone, hope you’re well and enjoying the summer.

Anniversaries. There have been several of them recently:

  • Flying Scotsman marked its centenary in 2023.
  • Several preserved railways have been marking anniversaries.
  • 2025 marks 200 years since the opening of the Stockton and Darlington Railway (can’t forget the big one, can we?!)

There have been several SR-related anniversaries as well. N15 ‘Sir Lamiel’ marked its centenary in June 2025. The sole N, no. 1874, is 100 years old in September.

If you’ve followed the blog for a while, you’ll know that I am a big fan of the ‘Lord Nelson’ class. In August 2026, no. 850 ‘Lord Nelson’ marks its centenary. What better time to have an add-on on the class available! Thus, I am excited to announce that the next locomotive add-on from SLC will be the Lord Nelson class!

For a class of only 16 engines, the ‘Lord Nelson’s have a complex history. There are lots of variations to include, as well as some details that haven’t been identified before!

As I build the add-on, I’ll be making more use of the blog and the SLC YouTube channel. All future add-on updates will be under the banner ‘In The Works’. These will be a mixture of posts here on the website and videos on the YouTube channel. So make sure you’re subscribed to both so you don’t miss out.

But that’s not all. My interest in railways isn’t limited to just Train Simulator Classic. So there were will be several other series appearing on the website and YouTube channel.

Like many other developers, I’ve built up a large library as I research projects. Some of these may not be so well known. So in the blog series ‘Behind the Cover’ I’ll look at some of these lesser known publications.

‘SLC Scaled’ will be focused on my model railway adventures; repairing/maintaining and otherwise mucking about with model trains. This will be primarily on the SLC YouTube channel, but there may be the occasional written article on the website.

Finally, in ‘Behind the Lens’ I’ll share my visits to various railways and museums as well as mainline steam.

There’s no schedule for any of these series. They will be posted when I have something to show/write about. Hopefully, though, they’ll be more interesting than the 6-monthly I’m still working on an add-on style updates of late.

So much to look out for and I hope you’re as excited as I am.

Until next time…

SLC Update 2 January 2025

Posted on by steamlococollection in SR Z Class

Just a little update to say that V1.1 of the ‘Z’ class add-on has been released. Customers should receive an email informing you that the update is available within 24 hours.

A big thank you to everyone who has sent in feedback, it really does help.

The full change list is:

  • Manual references corrected
  • AWS script modified
  • Cab AO corrected
  • Cab windows now animate externally
  • The small ejector handle now animates externally
  • Water/Gauge glass texture altered
  • Wheels on AI locomotives now animate
  • AI locomotives now emit smoke
  • Pre-set dynamic numbers corrected
  • Lamps/Headcodes modified and retextured
  • New lamp variants added
  • Lamps now have emissive options.

As a note, the ‘Z’ class has been developed without the use of third-party enhancers which modify the shaders in Train Simulator, Therefore, if you use an enhancer program you may see decal, glass or texture issues, depending on your settings. These issues can be resolved by disabling the enhancer while using the ‘Z’ class or possibly by modifying the settings in the enhancer.

Until next time…

SLC Update 27 December 2024

Posted on by steamlococollection in Add-on Releases, SR Z Class

Last update: 13 April 2023. Whoops!

Hi everyone, I hope you’re all well. It certainly has been a while since the last update. I’m pleased to say that the ‘Z’ class add-on is now finished and is available to purchase from this link. https://steamlococollection.co.uk/sr-maunsell-z-0-8-0t/

It’s fair to say that the ‘Z’ has been a challenging add-on. I’ve hit several issues along the way which has slowed my progress, I’ve also been taking my time to improve on the texturing. I’m aware that texturing has been a weak point on SLC models, and I hope that in the ‘Z’ class I’ve made some big steps forward. This is why your feedback is so important.

One of the main reasons for the lack of updates is that I’ve had a major change in my circumstances which means that I’m not spending as much time on SLC as I have done in the past. Now to be clear, this isn’t a preamble to me saying that SLC will be closing down, far from it. I have some exciting projects lined up, it just might take me a bit longer to get to them and get them finished. So from this point onward, if I’ve not announced that I’m actively working on something assume that it’s not an active project.

So what is next? Well that would be telling, see you in 2025.

SLC Update 13 APRIL 2023

Posted on by steamlococollection in SR Z Class

Hi everyone, hope you are all well.

It’s certainly been a while since I last posted anything. December 2022 marked ten years since the release of the first SLC model. A lot has happened in that time.

So what’s happening in the SLC Works.

Z CLASS

The ‘Z’ is progressing well. The base model is in-game and I’m gradually adding all of the features and scripting to this base model first, before proceeding to create the other liveries.

As I’ve mentioned before in other blog posts, despite the small size of the ‘Z’ class, only 8 members, the number of variations I’ve observed in photographs and drawings is quite surprising. I was unable to find any reference to several of the variations in published material, making the ‘Z’ class add-on the first time they will have been identified/highlighted.

So how about some screenshots?

Of course, the add-on is still very much WIP, so textures etc may change between now and the release.

SECR Trio ‘B’ COACHES

I’ve decided to combine packs 3 & 4 together as there wasn’t a clear distinction in time period like there is between packs 1 & 2. This is progressing slowly, but will be the next release after the ‘Z’. Released alongside pack 3 will be an update to packs 1 & 2.

LORD NELSON

Because of various issues, the ‘Lord Nelson’ add-on has been on the back burner for a while now. Once the ‘Z’ and Trio ‘B’ coaches are out, work on the ‘Lord Nelson’ will recommence.

SCHOOLS

Because the ‘Lord Nelson’ and the ‘Schools’ classes share several components, it made sense to develop both locomotives together. I have tie-in DLC planned for both locomotives so there’s much to look forward to.

And that just about completes this long overdue update. Until next time…

SLC Update 22 July 2022

Posted on by steamlococollection in SR Z Class

THE JOYS OF VIRTUAL PLUMBING

Hi everyone, hope you’re all doing well. Time for an update on the Z class.

With most of the main components modelled, the past month has mainly been spent creating, bending and getting frustrated at times with the myriad number of pipes required for the locomotive.

While not essential for a Train Simulator Classic model, I find there is something very satisfying about being able to follow a pipe from origin to destination, rather than it just simply disappearing.

For those not familiar, the inside valve gear on the ‘Z’ class was rather unusual as it employed a second eccentric to give the movement usually given through a combination lever. In the past valve gear animation has been something I dread doing but I was extremely pleased to find a much more efficient way of rigging the valve gear for the ‘Z’ though there won’t be a visible difference for you as the end-user.

I was surprised that as I added more components to the cab, it didn’t feel crowded like on some locomotives. One of the more novel features of the ‘Z’ class was the fitting of a steam brake alongside a Gresham and Craven ‘Dreadnought’ vacuum ejector. The Maunsell moguls and ‘W’ class, at least when they were built, were fitted with a Davies and Metcalfe ejector and steam brake valve.

A few years ago, when researching another locomotive at the Railway Museum’s Search Engine a few years ago, I came across a drawing of a couple of steam brake valves. My hope that these might come in useful in the future proved true when I started researching the ‘Z’. One of the brake valves looked remarkably similar to that shown in the General Arrangement drawing.

Sometimes though having a drawing of a component isn’t enough and you can’t beat being able to photograph and inspect the actual component. Unfortunately in the case of the type of steam brake fitted to the ‘Z’, there doesn’t appear to be an example that has survived. As a result, it’s very much a case of “make your best guess”. Overall though I’m pleased with how the steam brake is coming together and it will be another first for me as I’ve never simulated a steam brake on a model before.

There’s still a lot to get done, one of the biggest jobs on the to-do list is to finish modelling the AWS system, you can just see the completed stretcher for the receiver and junction box near the rear bufferbeam. Hopefully, it won’t be too long before all the outstanding modelling is completed and I can start getting the model textured and into the game.

Until next time…

SLC Update 1 July 2022

Posted on by steamlococollection in Announcements

Hi everyone, I hope you are all well.

Apologies for the lack of updates over the past few months. April was a hectic month outside of SLC work, and due to various decisions that I have taken it would have been premature to reveal what I’ve been working on. A couple of weeks ago I posted a clue on the ‘In Development’ page, and I am now able to reveal what that secret project is.

It’s easy to think that producing a pack of coaches is a simple matter, but in many respects, building coaches is more complicated and involved than locomotives. As I mentioned in a previous blog post I now have several projects on the go at any one time, including the remaining two Trio ‘B’ packs, allowing me to adapt to circumstances and changing interests. Consequently, I may have projects underway that I have announced. One of which is…

The SR Maunsell ‘Z’ class!

While the ‘Z’ class engines were a small class, only 8 being built, they have a fascinating history and I’m looking forward to revealing some of that history in the add-on and the accompanying manual.

Modelling work is progressing well and scripting, as well as sound setup, has already started. Keep an eye on the blog for more information.

Until next time…

SLC Update 1 March 2022

Posted on by steamlococollection in Announcements

Another month, another blog post.

A big thank you to everyone who has purchased the first Trio B pack, I hope you’re enjoying the coaches. Work on the remaining packs is well underway. Rather than getting one pack finished and moving on to the next, I’ve decided to get one coach finished in each of the packs. This allows me to check that I’m happy with the overall appearance of each livery before starting on the remaining coaches.

In the meantime, I thought you might be interested in seeing some Work In Progress shots of the upcoming liveries.

Diagram 2332/2 – Southern Railway Late 1920s Green
Diagram 2332/2 – Southern Railway Post-War Malachite Green

But that’s not all I have for this post. It’s always been my intention, whenever possible, to keep my add-ons up to date. However, because I’ve been working in a very linear fashion, scheduling a slot for updating add-ons has been a challenge, with the inevitable results that they haven’t got done.

However, I’ve changed the way I work and as the ‘Schools’ class is the most popular SLC add-on it is the first add-on that will be upgraded.

What will be involved in the update process?

  • Any parts of the model which are not up to standards or incorrect will be remade/altered.
  • The texturing will be completely redone, and texturing techniques like those on the Trio ‘B’ coaches will be used.
  • The soundset will be heavily reworked with a large number of new sounds.
  • The latest SLC scripting will be applied.
  • The add-on will be expanded to include all members of the class.
  • Additional liveries and variations will be added.

As a result of a large number of changes planned, this will not be a free update for existing customers. However, there will be some form of discount for anyone who owns the SLC ‘Schools’ add-on that is currently available.

The update won’t be happening overnight, so keep an eye on the blog for any updates.

Until next time …

SLC Update 30 November 2021

Posted on by steamlococollection in SECR H Class, Uncategorized

Hi Everyone, I hope you’re all well and staying safe.

I know I’ve not posted anything for a while, but hopefully, this blog will make up for the lack of updates during the summer.

H Class V1.3

I’m pleased to announce the release of V1.3 of the ‘H’ class add-on. I’d had the update planned, but when a customer raised an issue recently, it seemed like the ideal opportunity to get the update done. 

Let’s say I got a little carried away. What was intended to be updating a few textures turned into something larger, but I’m delighted with the results and I hope you’ll enjoy the update too.

So the list of changes/additions in V1.3 are:

  • Adjusted collision boxes on all locomotive models.
  • Altered reflectiveness and shininess of smokebox texture.
  • Adjusted sander steam particles.
  • Added sound to the steam sander.
  • Steam sanders now have a delay between opening the valve and sand being applied.
  • Altered colour of SE&CR Brunswick Green.
  • Altered colour of SE&CR Dark Red.
  • Added early SR Green (LSWR Green) model.
  • Corrected the shade of Dark Maunsell Green.
  • Added 1938 style of lining Dark Maunsell Green model.
  • Altered colour of Bulleid style lettering and numerals.
  • Altered colour of Bulleid ‘Sunshine’ style lettering and numerals.
  • Added 4 styles of Gill Sans numbering (8” Yellow, 8” Straw, 10” Yellow, 10” Straw).
  • BR Clean Transitional (now combined with BR Transitional livery).
  • Dynamic Numbering for BR Transitional & BR Transitional PP liveries re-done. (101 dynamic numbers).
  • Dynamic Numbering for BR Lined & BR Lined PP liveries re-done. (342 dynamic numbers).
  • Altered shades of Red, Grey, Cream & Yellow BR lining.
  • Added 2017 No. 263 Livery
  • Corrected colour of Gill Sans lettering and numerals on PP coaches.
  • Added lighting to PP coaches (turns on automatically at night time).

Another change I’ve made that might not be obvious is the use of AP files. While these don’t save you any storage space they do allow the add-on to benefit from the fast loading feature which was enabled as standard in Train Simulator 2022.

Lord Nelson Update

Work on the Lord Nelson add-on got put on hold during the summer as another project jumped into first place. As this project nears completion, I should be able to restart work on the Lord Nelson in the new year. 

Next Project

What is this mysterious project? Well, I’ll just leave this little teaser here.

Until next time.